This tissue paper roll converting machine is equipped with special arc-shaped clamping device for slitting toilet paper roll and non-woven fabric roll.

Technical data:

Model	QZ-S150
Paper cutting length	85-300mm
Paper cutting width	80-120mm
Paper cutting height	40-140mm
Paper cutting speed	10-140cuts/min
Main switch	Omron
Power supply type	AC380V/50HZ/3PH
Installed power	10 KW, AC 380 V/ 50-60 Hz, 3ph.
Blade motor power	5.2 KW, AC 380 V/ 50-60 Hz, 3 ph.
Servo motor power	3.0 KW, AC 380 V/ 50-60 Hz, 3 ph.
Step motor power	1.5 KW, AC 380 V/ 50-60 Hz, 3 ph.
Gas consumption	0.6Mpa
Control system	PLC + HMI (Siemens/Germany), Servo (Delta/Taiwan)
Feeding mode	Timing belt positioning transmission, Servo drive (Delta/Taiwan)
Cutting mode	360° rotary movement, continuous cutting
Blade movement	1090 rpm.
Blade sharpening	Automatic sharpening and lubricating
Blade outer diameter	Φ 610mm
Grinding stone	Φ100mm
Machine weight	1400kg
Machine dimension	L4020W1500H1900mm

Product details:

1- Cutting System: Orbital.

2- Double infeed lanes with stainless steel channels.

3- the cutting speed varies from 40-140 cuts/min.

4- Three servo system for control of product feeding and blade mechanism.

5- Finished paper roll: length 80–300mm, diameter 85 –140 mm.

6- Two sets of cylinder paper up-down pressing devices with height adjustable.

7- Two sets of side mechanical clamp system with width adjustable.

8- High endurance timing belts driving system.

9-The paper edge cutting width is controlled on the touch screen.

10- Two emergency stop buttons installed for each lane.

11- Automatic blade sharpening and lubrication.

12- Program controller: Siemens brand PLC.

13- Operation panel: Siemens brand touch screen.

14- Fault display alarm on the touch screen.

15- Products counting available on the touch screen with reset function.

16- Automatic stop in case of protective cabin doors are opened.

17- Automatic stop in case of any abnormal paper feeding.

18- Automatic stop against no material feeding.

Inquiry Cart 0