FOSHAN TECWIN MECHANICAL EQUIPMENT CO., LTD.
FOSHAN TECWIN MECHANICAL EQUIPMENT CO., LTD.
Add to Cart
Double Lane Tissue Paper Roll / Toilet Paper Roll Converting Machine
Technical details:
1- Suitable for cutting toilet roll diameter of 85-140mm and length range from 80-300mm.
2- Cutting System: Orbital.
3- Cutting material: tight and flabby toilet paper roll and non-woven fabric roll in good condition.
4- Double infeed lanes with stainless steel channels.
5- the cutting speed varies from 40-140 cuts/min.
6- Paper roll length: 2200 mm max.
7- Two servo motors indexing to cut different length.
8- Finished paper roll: length 80–300mm, diameter 85 –140 mm.
9- Two in-feed lanes with 2 servo motors.
10- Two sets of cylinder paper up-down pressing devices with height adjustable.
11- Two sets of side mechanical clamp system with width adjustable.
12- High endurance timing belts driving system.
13- The paper trim cutting width can be done by changing the parameters on the screen.
14- One emergency stop button installed for each infeed lane.
15- Automatic blade sharpening and lubrication are controlled on the touch screen.
16- Automatic blade lubrication
17- Two sets of servo drive system for any length desired on the paper roll within 80–300 mm.
18- Program controller: Siemens brand PLC.
19- Operation panel: Siemens brand touch screen.
20- Fault alarm display on the touch screen.
21- Products counting available on the touch screen with reset function.
22- Automatic stop in case that protective cabin doors are opened.
23- Automatic stop in case of any abnormal paper feeding.
24- Automatic stop against no material feeding.
25- Transmission: blade by V-belts; pneumatic unit and conveyor by timing belts.
26- Vent fan can be equipped on top of the machine as needed.
Technical specifications:
| Model | QZ-S150 |
| Paper cutting length | 85-300mm |
| Paper cutting width | 80-120mm |
| Paper cutting height | 40-140mm |
| Paper cutting speed | 10-140cuts/min |
| Main switch | Omron |
| Power supply type | AC380V/50HZ/3PH |
| Installed power | 10 KW, AC 380 V/ 50-60 Hz, 3ph. |
| Blade motor power | 5.2 KW, AC 380 V/ 50-60 Hz, 3 ph. |
| Servo motor power | 3.0 KW, AC 380 V/ 50-60 Hz, 3 ph. |
| Step motor power | 1.5 KW, AC 380 V/ 50-60 Hz, 3 ph. |
| Gas consumption | 0.6Mpa |
| Control system | PLC + HMI (Siemens/Germany), Servo (Delta/Taiwan) |
| Feeding mode | Timing belt positioning transmission, Servo drive (Delta/Taiwan) |
| Cutting mode | 360° rotary movement, continuous cutting |
| Blade movement | 1090 rpm. |
| Blade sharpening | Automatic sharpening and lubricating |
| Blade outer diameter | Φ 610mm |
| Grinding stone | Φ100mm |
| Machine weight | 1400kg |
| Machine dimension | L4020*W1500*H1900mm |
Application:
This tissue paper roll / toilet paper roll converting machine is equipped with special arc-shaped clamping device for slitting toilet paper roll and non-woven fabric roll.